MC Ju106 ArpOne by Michał Cacko
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 50Hz (0) and is modulated by LFO 1, VCF Env.
LFO 1 direct modulation amount for low-pass filter cut-off frequency is 192.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 232.
Low-pass filter envelope amount is modulated by Note Num.
Note Num direct modulation amount for low-pass filter envelope amount is 108.
Filter has no resonance.
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Arpeggiator pitch
Arpeggiator rate is 120 bpm with a clock divider of 1/16 and is set to key synchronisation mode.
Arpeggiator gate is manually set to 0.
Arpeggiator mode is Up (0) over 2 octaves.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
Reverse Reverb fx
not yet complete
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 108 |
LFO 1 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 192 |
| name | value |
|---|---|
| LFO 1 Rate | 0.22Hz (58) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 1 |
| LFO 1 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.48s (81) |
| VCA Envelope Sustain Level | 0% (0) |
| VCA Envelope Release Time | 0.46s (79) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 232 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.48s (81) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 0.46s (79) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |